Micron MT29F2G08ABAEAWP-ITX:E (Custom 03) TSOP(48) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This is a custom algorithm. The algorithm checks all 8 first byte of spare area of first page of block. If first byte is actually 0 and there is no less than 75% of bits readout as 0 in the 8 bytes the block is considered bad. To Erase/Program the device use device selection Micron MT29F1G08ABADAWP-E:D (Custom 02) This is a NAND Flash Memory device with a minimum of 2008 blocks. Each block contains 64 pages which are divided into a 2K Byte main page and a 64 byte control area. This algorithm is mapped with each page considered a contiguous (2K+64) byte page. Bad Blocks are indicated at byte 2048 of the first page of a block. This device uses an internal ECC that is enabled by default. Bit Error Rate Tolerance is set to ‘1’ by default. It can be modified under Device > NAND Options. ‘