Monolithic Power Systems MP2972 LAP(48) Device

Adapters for Automated Programmers

9th Gen

LX4ASMR48QFNTA

Adapters for Manual Programmers

9th Gen

LX4ASMR48QFNTA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: Device Information:

Device Type:	Digital Power Controller
Algorithm Programming Method:	PMBus

Memory Organization:

*Section*	**Attributes^()***	Included in default Range (Y/N)	*DUT Physical Byte Address (hex)(if this area is selected/Activated)*	*BPWin Buffer Byte Address (hex)*
PMBus Registers	R/W/E	Yes	N/A	0 – FFFFh

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: This algorithm will parse a text file generated by Monolithic Power Systems’ tools.If multi-config is not enabled then only registers up to 0x1E will be programmed in page 2.Page 2 values after register 0x1E that are read out may not match the data file if multi-config is disabled.

1. When loading the data pattern select Load File As ‘Binary.’ 2. Serialization is not supported for this device. 3. Read will print the Configuration Register and its value to the output window. 4. Read operation format the data in the buffer as the first two bytes for the Configuration register and the next two bytes for the data.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	65536
Manufacturer	Monolithic Power Systems
Packages	LAP(48)
Part Number	MP2972
Set programming	Yes
Vcc(program)	3.3
Package