Motorola MC68HC705B16NMFNE PLCC(52) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASM52PF | FX4ASM52PF, FASM52PF, WX4ASM52PF (repl.) | WX4ASM52PF |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM52PF, FASM52PF | FX4SM52PF, FSM52PF, FX4ASM52PF, FASM52PF, WX4ASM52PF (repl.) | WX4ASM52PF |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM52PF, FASM52PF | FX4SM52PF, FSM52PF, FX4ASM52PF, FASM52PF, WX4ASM52PF (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EEPROM and EPROM.The following describes the buffer setup:Addresses $0020 to $004F are EPROM$0101 to $01FF are EEPROM$0300 to $03DFD are EPROM$3DFE is Mask Option Register(MOR)and $3FF0 to $3FFF are user vectors.The address $100 is EEPROM options register(OPTR)This byte can be set up under Device-Configure.The OPTR is ignored during normal Program and Verify. Please use Secure command to program OPTR byte. The bit 0′ of OPTR is security bit.The blank state of the EPROM is $00. The blank state of the EEPROM is $FF. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16384 |
|---|---|
| Manufacturer | Motorola |
| Packages | PLCC(52) |
| Part Number | MC68HC705B16NMFNE |
| Vcc(program) | 5 |
| Package |