NEC uPD70F3706GC-8EA-A QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR100QNR | FASMR100QNR |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR100QNR, FASMR100QNR, WASMR100QNR (repl.) | FSMR100QNR, FASMR100QNR, WASMR100QNR (repl.) | WASMR100QNR |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR100QNR, FASMR100QNR, WASMR100QNR (repl.) | FSMR100QNR, FASMR100QNR, WASMR100QNR (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 3-Wire Serial I/O Mode(CSIB0).The Security Byte can be set through Device Configureand programmed with Secure command.In order to program this Byte please enable Secure.Set Bit 0 to 0 will disable Chip EraseSet Bit 1 to 0 will disable Block EraseSet Bit 2 to 0 will disable Program.Set Bit 3 to 0 will disable Read.Bits 4 to 7 are reserved and should be set to 1s.Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 isprogrammed to 0 the whole chip is secured and no operation can be done on it.Security for the device cannot be verified.This algorithm does not support Erase for a secured blank device.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 131072 |
|---|---|
| Manufacturer | NEC |
| Packages | QFP(100) |
| Part Number | uPD70F3706GC-8EA-A |
| Vcc(program) | 5 |
| Package |