NEC uPD78F0501AMC-CAB(A)-AX SSOP(30) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR30SSC | FASMR30SSC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR30SSC, FASMR30SSC, LASMR30SSC (repl.) | FSMR30SSC, FASMR30SSC, LASMR30SSC (repl.) | LASMR30SSC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR30SSC, FASMR30SSC, LASMR30SSC (repl.) | FSMR30SSC, FASMR30SSC, LASMR30SSC (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algo is based on parameter file 78F0501A.prm version 1.01.This algorithm supports Device version V0.00Firmware version V2.10. It can not be used for any other versions.3-Wire Serial I/O Mode(CSIB0). aThe Security Byte can be set through Device Configureand programmed with Secure command.In order to program this Byte please enable Secure.Set Bit 0 to 0 will disable Chip EraseSet Bit 1 to 0 will disable Block EraseSet Bit 2 to 0 will disable Program.Bit 3 should always be set to 1 since this device doesn’t support Read operation.Bits 4 to 7 are reserved and should be set to 1s.Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 isprogrammed to 0 the whole chip is secured and no operation can be done on it.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16384 |
|---|---|
| Manufacturer | NEC |
| Packages | SSOP(30) |
| Part Number | uPD78F0501AMC-CAB |
| Vcc(program) | 5 |
| Package |