+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page
Numonyx JS28F640P30BF TSOP(56) Device

Numonyx JS28F640P30BF TSOP(56) Device

Adapters for Automated Programmers

6th Gen 7th Gen 9th Gen
FXASM56TE, FASM56TE, FASM56T FX4ASM56TE, FXASM56TE, FASM56TE, FASM56T, LX4ASM56TE (repl.) LX4ASM56TE

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FXSM56TE, FSM56TE, FSM56TB, FXASM56TE, FASM56TE, FASM56T, FSM56T (obs.) FX4SM56TE, FXSM56TE, FSM56TE, FSM56TB, FX4ASM56TE, FXASM56TE, FASM56TE, FASM56T, FSM56T (obs.), LX4ASM56TE (repl.) LX4ASM56TE

Adapters for Engineering Programmers

6th Gen 7th Gen
FXSM56TE, FSM56TE, FSM56TB, FXASM56TE, FASM56TE, FASM56T, FSM56T (obs.) FX4SM56TE, FXSM56TE, FSM56TE, FSM56TB, FX4ASM56TE, FXASM56TE, FASM56TE, FASM56T, FSM56T (obs.), LX4ASM56TE (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: 64Mbit Flash. This device contains 17 128-bit Protection Registers PR0 through PR16 located at address range [800000h-80010Fh] in the Data Pattern. Example: PR0[0x81-0x88] is located at [800000h-80000Fh] PR1[0x8A-0x91] at [800010h-80001Fh] and so on. PR0[63:0] are permanently programmed by Intel with a unique number for each flash device. PR0[127:64] and PR1 through PR16 are one-time programmable (OTP) and available for the user to program. Once programmed the user-programmable register can be locked to prevent further programming using Device > Configure menu. Once the protection register is locked the entire user segment is locked and no more user bits may be programmed. One Time Protection is available in 2 different customer ordered options. The option information is only available on the packaging of the device and is not marked on the device itself. Device operation will fail ‘Initialize’ under the following conditions: 1.’Device OTP’ option is selected under Device > Configure for a ‘Standard OTP’ device. 2.’Standard OTP’ option is selected under Device > Configure for a ‘Device OTP’ device. The first option-‘Standard OTP’ does not allow any special OTP protection of the main array. The second option-‘Device OTP’ will allow protection of data in all of the main memory array blocks.

OTP Address(1) Data Pattern Address Main Array Blocks Protected
ECh 8000D5h-8000D4h 18:0(2)
EDh 8000D7h-8000D6h 34:19
F0h 8000DDh-8000DCh 50:35
F1h 8000DFh-8000DEh 64:51
Notes: 1. For Bottom Boot the highest number OTP bit locks the highest numbered block.For example programming bit 15 of OTP address F1h permanently locks Block 66and bit 0 permanently locks Block 51. 2. Programming bit 0 of Device Address ECh (Data Pattern Address 8000D4h) locks four parameter blocks(Blocks 0-3). The default Device Range is set to [000000h-3FFFFFh]. Please select ‘Entire File’ under Device > Range if Protection Registers need to be included. Password Access Feature is currently not supported. ‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Numonyx
Packages

TSOP(56)
Part Number

JS28F640P30BF
Set programming

Yes
Vcc(program)

1.9
Package