+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Numonyx PF48F3000P0ZTQEA BGA(88) Device

Adapters for Automated Programmers

6th Gen 7th Gen 9th Gen
FXASM88SPJ, FASM88SPJ FX4ASM88SPJ, FXASM88SPJ, FASM88SPJ, WX4ASM88SPJ (repl.) WX4ASM88SPJ

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FXSM88SPJ, FSM88SPJ, FXASM88SPJ, FASM88SPJ FX4SM88SPJ, FXSM88SPJ, FSM88SPJ, FX4ASM88SPJ, FXASM88SPJ, FASM88SPJ, WX4ASM88SPJ (repl.) WX4ASM88SPJ

Adapters for Engineering Programmers

6th Gen 7th Gen
FXSM88SPJ, FSM88SPJ, FXASM88SPJ, FASM88SPJ FX4SM88SPJ, FXSM88SPJ, FSM88SPJ, FX4ASM88SPJ, FXASM88SPJ, FASM88SPJ, WX4ASM88SPJ (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 128 Mbit
Algorithm Programming method: Buffer Programming


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 007F_FFFF 0000_0000 – 00FF_FFFF
OTP sector R/W N0 0080_0000 – 0080_0087 0100_0000 – 0100_01FF
Default Algorithm Range 0000_0000 – 007F_FFFF 0000_0000 – 00FF_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

This device contains 17 128-bit Protection Registers PR0 through PR16 located at address range [1000000h-1000007h] in the buffer. Example: PR0[0x81-0x88] is located at [1000000h-100000Fh]PR1[0x8A-0x91] at [1000010h-100010Fh] and so on. PR0[63:0] are permanently programmed by Intel with a unique number for each flash device. PR0[127:64] and PR1 through PR16 are one-time programmable (OTP) and available for the user to program. If one or more OTP registers are programmed the range must be set to exclude the registers or Erase/Program will fail. Once programmed the user-programmableregister can be locked to prevent further programming using Device Configure menu. Once the protection register is locked the entire user segment is locked and no more user bits may be programmed..

[This device does not support serialization]

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Numonyx

Packages

BGA(88)

Part Number

PF48F3000P0ZTQEA

Set programming

Yes

Vcc(program)

1.9

Package