NXP Semiconductors LPC2131FBD64/01 QFP(64) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE4ASMR64LQFPM, FVE4ASMR64LQFPM |
Adapters for Manual Programmers
| 8th Gen |
| FVE4ASMR64LQFPM, FVE4ASMR64LQFPM |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 32 Kbyte |
| Algorithm Programming Method: | JTAG/SWD + Custom bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| [Flash Memory] | [R/W/E] | [Yes] | [00000 – 3FFF] | [00000 – 7FFE] |
| Default Algorithm Range | — | — | [00000 – 3FFF] | [00000 – 7FFE] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? |
| [Code Read Protection] | [Enable or Disable CRP.] | [Disabled] | [Yes] |
| [Auto-run code in Flash after reset] | [Select Enable to have code in device’s Flash auto-run after a Reset. | [Enable] | [Yes] |
| 1. | Serialization Supported: | Yes |
| 2. | [Special file format required]: | No |
| 3. | Device Configure option ‘Auto-run code in Flash after reset’ can be set to change buffer location 14h-17h to contain the 2’s complementof the check-sum of the remaining interrupt vectors. This option is enabled by default.will disable JTAG support. Erase is the only function that will work oncea device has been secured. This device is 32bit wide little endian. | |
| 4. | Code read protection is enabled by programming the flash address location 1FCh .(User flash sector 0) with value 87654321h (2271560481 Decimal). | |
| 5. | Enabling code protection will disable JTAG support.Erase is the only function that will work once a device has been secured. This device is 32bit wide little endian. Malformed interrupt vectors may cause this device to stop responding for the erase command. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | NXP Semiconductors |
|---|---|
| Packages | QFP(64) |
| Part Number | LPC2131FBD64/01 |
| Vcc(program) | 3.3 |
| Package |