NXP Semiconductors MC9S08PT16VWJ SOIC(20) Device

Adapters for Automated Programmers

9th Gen

FVE4ASMR20SKBA

Adapters for Manual Programmers

9th Gen

FVE4ASMR20SKBA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	MCU
Device Size:	256Bytes EEPROM + 16KB Flash

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
EEPROM	R/W/E	Yes	0000_3100 – 0000_31FF	0000_3100 – 0000_31FF
FLASH	R/W/E	Yes	0000_C000 – 0000_FFFF	0000_C000 – 0000_FFFF

Default Algorithm Range	—	—	0000_3100 – 0000_FFFF	0000_3100 – 0000_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Special Device Considerations:

There are some locations reserved in the FLASH memory map. The following are reserved addresses: $FF78-$FF7B. These locations in Data Pattern must fill 0xFF.Erase command will erase entire FLASH/EEPROM and reserved memory.The lower two bits (Bit1 and Bit0) at address $FF7F(FSEC) are security bits (SEC1:SEC0).They are read 1:0 if unsecured during Read and Compare.SEC0 is ignored during Program and Verify.This algorithm do not support trim NV_FTRIM(0xFF6E) NV_ICSTRM(0xFF6F)these location supported as normal memory.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	65536
Manufacturer	NXP Semiconductors
Packages	SOIC(20)
Part Number	MC9S08PT16VWJ
Set programming	Yes
Vcc(program)	3.3
Package