NXP Semiconductors MM9Z1J638BM2EP LAP(48) Device
Adapters for Automated Programmers
| 9th Gen |
| FVX4ASMC48QN |
Adapters for Manual Programmers
| 9th Gen |
| FVX4ASMC48QN |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 4kB of EEPROM and 128kB of Flash |
| Algorithm Programming Method: | BDM |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) | EEPROM | R/W/E | Yes | 0010 0000 – 0010 0FFF | 0010 0000 – 0010 0FFF |
| Program NVM | R/W/E | Yes | 00FE 0000 – 00FF FFFF | 00FE 0000 – 00FF FFFF |
| Default Algorithm Range | — | — | 0010 0000 – 00FF FFFF | 0010 0000 – 00FF FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: Programming the Flash configuration field may cause standalone Verify/Compare/Read operations to fail. Programming the FSEC byte may secure the device. Erase will perform mass erase. To program FSEC to 0xFF you must turn off Auto Range in Device Config. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16777216 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | LAP(48) |
| Part Number | MM9Z1J638BM2EP |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |