NXP Semiconductors P89V51RC2 (PDIP40) DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D600 | FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FSM48DL, FSM48DE, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with two internal flash memory blocks.The primary flash block (Block 0) is mapped to [00000h-07FFFh] in the Buffer.The secondary flash memory block (Block 1) is mapped to [E000h-FFFFh] in the Buffer.Block 1 contains the Philips-provided boot code. The ISP boot code will be erased by a Chip Erase.Please select Block 0 (by setting Device Ranges) if only User Flash needs to be programmed.If the Security Bit is being programmed a serial number should be programmed into the device.The Serial Number is mapped to [FF01h-FF1Fh] in the Buffer. Location FF00h contains the length of theserial number.Location FF20h in the Buffer indicates the status of the SoftICE flag. It must be disabled ifthe 31-Byte Serial Number is other than all 00h or all FFh.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | DIP(40) |
| Part Number | P89V51RC2 |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |