Philips Semiconductors P87C660X2FA-S PLCC(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44P, FASM44PF | FASM44P, FASM44PF |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with 16KB OTP/ROM.Default buffer value must be set to 255(FFh). The EncryptBuf is used on read back. If the Encryption array has been programmed EncryptBuf must contain the correct encryption key toread the device properly. You must select the appropriate security mode to operate the secure command. Three secure bits are available in this chip: SB1 SB2 and SB3. If SB1is set further programming is disabled. If SB2 is set verify of ROM is disabled. The encryption array itself cannot be read out.!!!Note: If both Encryption and Secure functions are required they must be done together by enabling both the Encrypt after programming’ and ‘Secure after programming’ . ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16384 |
|---|---|
| Manufacturer | Philips Semiconductors |
| Packages | PLCC(44) |
| Part Number | P87C660X2FA-S |
| Vcc(program) | 5 |
| Package |