Renesas-M M30626FHPGP QFP(100) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: M16C/62P Microcomputer Flash Memory Version.Under Device Options the range address is displayed in word mode (16 bit) while in the bufferthe address is in byte mode (8 bit). In the buffer4K-byte Boot ROM memory is mapped to 00000h-00FFFh.4K-byte Data ROM (block A) is mapped to 0F000h-0FFFFhUser ROM is divided into several blocks and they are mapped to A0000h-FFFFFh.The User Boot and Data ROMs are selected in the Configure Options.Buffer locations 01000h-0EFFFh and 10000h-9FFFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.Buffer locations FFFFEh-FFFFFh is the security word. If secured standalone Verify and Compare will fail.Config Options allow the individual ROM sections to be selected for device operations. Before executingany command at least 1 Operations Area must be selected.*** Verify after Programming must be enabled during programming. ***All blocks can be locked by setting LOCK under Device Configure and the lock-bitscan be cleared only by erasing the ROM area the lock-bits control. The Boot ROM area of the device hasa standard serial I/O mode control program stored in it when shipped from the factory. Therefore ifthe device is going to be used in standard serial I/O mode do not rewrite the Boot ROM area.