Renesas-M M3062CF8TGP QFP(100) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: M16C/62P Microcomputer Flash Memory Version.The range address is displayed in word mode (16 bit) while in the Bufferthe address is in byte mode (8 bit). In the Buffer 4K-byte Boot blockmemory is mapped to 01000h-01FFFh. User area is divided into several blocksand they are mapped to F0000h-FFFFFh. Each block can be erased and programmedseparately by setting the ranges.Buffer locations 00000h-00FFFh and 02000h-EFFFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.Buffer locations FFFFEh-FFFFFh is the security word. If securedstandalone Verify and Compare will fail.*** Verify after Programming must be enabled during programming. ***All blocks can be locked by setting LOCK under Device Configureand the lock-bits can be cleared only by erasing the whole chip.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area.