Renesas-M M306N0FGTFP QFP(100) Device

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: M16C/6N Microcomputer. Flash Memory Version. The Byte order’ in Device/Options must be MSB=1LSB=0 (Little-Endian). The buffer setup: addresses 00000h-3FFFFh are the User ROM area. addresses 40000h-41FFFh are the Boot ROM area. * * * * Make sure that location 3FFFFh is set to FFh or CFh or device couldbe protected permanently and will fail verify.see Mitsubishi specificaions for more information. * * * *The Boot ROM area of the device has had a standard serial I/O modecontrol program stored in it when shipped from the Mitsubishi factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area (set Ranges to [0000h-1FFFFh] under DEVICE/OPTIONS). * * * *All blocks can be programmed or erased regardless of the stateof the lock-bits and the lock-bits can be cleared only by erase.You may secure this device from the Device/Options menu.Once device is secured it cannot be read/erased/programmed any more. ‘