Renesas-M M306N5FCTFP (Custom) QFP(100) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This is a custom algorithm. Two extra blocks are added.Block 7 is mapped to D0000h-DFFFFh.Block 8 is mapped to C0000h-CFFFFh.Erase for block 7 and 8 can be disabled under Device > Config.A short test for the address pins is performed after Power On.Addresses D0000h-D0005h in block 7 are skipped during Verify by default. This can be changed under Device > Configure.M16C/6N5 Microcomputer Flash Memory Version.The Buffer address is in byte mode (8 bit). In the buffer 8K-byte Boot Block ismapped to 00000h-01FFFh 4K-byte Data block is mapped to 0F000h-0FFFFh.User area is divided into several blocks and they are mapped to E0000h-FFFFFh.Buffer locations 02000h-EFFFh and 10000h-DFFFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.Buffer locations FFFFEh-FFFFFh is the security word. If secured standalone operations will fail.Device Configure Options allow the individual ROM sections to be selected for device operations. Before executingany command at least 1 Operations Area must be selected.All blocks can be locked by setting LOCK under Device Configure and the lock-bits can be cleared only by erase.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area. ‘