Renesas M30260F8VGP-U9 QFP(48) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: M16C/26T Microcomputer Flash Memory Version. This algorithm is written in parallel I/O mode. In the buffer 4K-byte Boot ROM is mapped to 00000h-00FFFh. 4K-byte Data ROM (block A & B) is mapped to 0F000h-0FFFFh 64K-byte User ROM is mapped to F0000h-FFFFFh. The User Boot and Data ROMs are selected in the Configure Options. Buffer locations 01000h-0EFFFh and 10000h-EFFFFh are not used and should be filled with FFh. Buffer locations FFE00h-FFFFFh are special. Buffer locations FFFFEh-FFFFFh is the security word. If secured standalone Verify and Compare will fail. Config Options allow the individual ROM sections to be selected for device operations. Before executing any command at least 1 Operations Area must be selected. The Boot ROM area of the device has a standard serial I/O mode control program stored in it when shipped from the factory. Therefore if the device is going to be used in standard serial I/O mode do not rewrite the Boot ROM area.