Renesas M38507F8-FP SSOP(42) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FXASMR42SBC, FASMR42SBC | FXASMR42SBC, FASMR42SBC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FXSMR42SBC, FSMR42SBC, FXASMR42SBC, FASMR42SBC, WX4ASMR42SBC (repl.) | FXSMR42SBC, FSMR42SBC, FXASMR42SBC, FASMR42SBC, WX4ASMR42SBC (repl.) | WX4ASMR42SBC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FXSMR42SBC, FSMR42SBC, FXASMR42SBC, FASMR42SBC, WX4ASMR42SBC (repl.) | FXSMR42SBC, FSMR42SBC, FXASMR42SBC, FASMR42SBC, WX4ASMR42SBC (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm is written in parallel I/O mode. In the buffer4K-byte Boot ROM is mapped to [0000h-0FFFh].There is a 32K-byte User ROM. However the first 80h bytes are reserved area and willnot be mapped to Buffer. The rest 7F80h bytes are mapped to [8080h-FFFFh].The User and Boot ROMs are selected in the Configure Options.Buffer locations 1000h-807Fh are not used and should be filled with FFh.Buffer locations FF00h-FFFFh are special.Buffer locations FFDBh is the security byte.If it is programmed any further device operation will fail.Config Options allow the individual ROM sections to be selected for device operations.Before executing any command at least 1 Operations Area must be selected.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | Renesas |
| Packages | SSOP(42) |
| Part Number | M38507F8-FP |
| Vcc(program) | 5 |
| Package |