Renesas R5F21102DFP QFP(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM32TQL | FASM32TQL |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM32TQL, FASM32TQL | FSM32TQL, FASM32TQL |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM32TQL, FASM32TQL | FSM32TQL, FASM32TQL |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The User ROM area is located at address range E000h-FFFFh.There are 7 ID codes locate at FFDFh FFE3h FFEBh FFEFh FFF3h FFF7h and FFFBh.If the flash is not blank the data at these locations in the buffer must match the ID codesin the device to enable the Standard Serial I/O mode. If the ID codes do not matchcommunication cannot be established. If the device was previously programmed withanother set of ID codes a stand alone Erase operation must be executed with correct ID codesbefore attempting to reprogram the flash.For blank devices (factory programmed) Erase operation is redundant and should be disabled using Device Options.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(32) |
| Part Number | R5F21102DFP |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |