Renesas R5F2122AJFP QFP(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR48LQFC | FX4ASMR48LQFC, FASMR48LQFC, WX4ASMR48LQFC (repl.) | WX4ASMR48LQFC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR48LQFC, FASMR48LQFC | FX4SMR48LQFC, FSMR48LQFC, FX4ASMR48LQFC, FASMR48LQFC, WX4ASMR48LQFC (repl.) | WX4ASMR48LQFC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR48LQFC, FASMR48LQFC | FX4SMR48LQFC, FSMR48LQFC, FX4ASMR48LQFC, FASMR48LQFC, WX4ASMR48LQFC (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: R8C/22 Microcomputer Flash Memory Version. This algorithm is written in parallel I/O mode. In the buffer 8K-byte Boot ROM is mapped to 0000h-1FFFh. 96K-byte User ROM is mapped to 4000h-1BFFFh. The User and Boot ROMs are selected in the Configure Options. Buffer locations 2000h-3FFFh are not used and should be filled with FFh. Buffer locations FFDCh-FFFFh are special. The last byte of User ROM (address FFFFh) contains code protection bits. If secured standalone operations will fail. Config Options allow the individual ROM sections to be selected for device operations. Before executing any command at least 1 Operations Area must be selected. The Boot ROM area of the device has a standard serial I/O mode control program stored in it when shipped from the factory. It is not necessary to program the boot area for normal use the device may fail communication if improper data is programmed into the Boot ROM area. To program the options in the Device Configure Secure must be enabled.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 114688 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(48) |
| Part Number | R5F2122AJFP |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |