+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Renesas R5F51138ADFP QFP(100) Device

Adapters for Automated Programmers

6th Gen 7th Gen
FASMR100QPK FX4ASMR100QPK, FASMR100QPK, LX4ASMR100QPK (repl.)

Adapters for Manual Programmers

6th Gen 7th Gen
FASMR100QPK FX4ASMR100QPK, FASMR100QPK, LX4ASMR100QPK (repl.)

Adapters for Engineering Programmers

6th Gen 7th Gen
FASMR100QPK FX4ASMR100QPK, FASMR100QPK, LX4ASMR100QPK (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Renesas 32-bit RX CPU core
Device Size: 8kB DataFlash ROM + 512kB User ROM
Algorithm Programming Method: Serial Communications Protocol w/ Two-wire UART

Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
DataFlash ROM W/E Yes 0010_0000-0010_1FFF 0000_0000 – 0000_1FFF
User ROM W/E Yes FFF8_0000 – FFFF_FFFF 0008_0000 – 000F_FFFF
Default Algorithm Range 0010_0000 – FFFF_FFFF 0000_0000 – 000F_FFFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

1. This device cannot be read back after the Erase/Program/Verify cycle.
2. Setting ID code protection may disable further operations.
Setting control code at FFFFFFA3h to 45h or 52h enables protection state.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

1048576

Manufacturer

Renesas

Packages

QFP(100)

Part Number

R5F51138ADFP

Set programming

Yes

Vcc(program)

3.3

Package