Renesas R5F5651EHDFP LFQFP(100) Device

Adapters for Automated Programmers

8th Gen	9th Gen
FVE4ASMR100LQFPAE, FVE4ASMR100LQFPAE	FVE4ASMR100LQFPAE

Adapters for Manual Programmers

8th Gen	9th Gen
FVE4ASMR100LQFPAE, FVE4ASMR100LQFPAE	FVE4ASMR100LQFPAE

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	32-bit RX CPU
Device Size:	32KByte Data Flash + 1.5MByte Code Flash Memory
Algorithm Programming Method:	Renesas UART bootloader

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Data Flash Memory	R/W/E	Yes	0010_0000 – 0010_7FFFh	0010_0000 – 0010_7FFFh
Configuration Setting Area	W/E	No (programmable through Secure Operation)	FE7F_5D00 – FE7F_5D7Fh	FE7F_5D00 – FE7F_5D7Fh
Code Flash Memory	R/W/E	Yes	FFE0_0000 – FFFF_FFFFh	FFE0_0000 – FFFF_FFFFh

Default Algorithm Range	—	—	0010_0000 – FFFF_FFFFh	0010_0000 – FFFF_FFFFh

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

1. The Endian Setting in Device Config determines how the data will be programmed into or read from the device. 2. The Secure operation will program the OCD/serial programmer ID setting register (OSIS) located in data buffer FE7F5D50 – FE7F5D5Fh. 3. All operations will attempt to use the default password to access the device. If the default password does not work then it will attempt to use the password at data buffer location FE7F5D50 – FE7F5D5Fh. 4. If the ID Control Code is 45h and the password is not known the erase operation will attempt an ID mismatch to erase the device. Erase operation will reset OSIS to the default password. 5. To read an ID protected device deselect Clear Buffer First and manually clear the data buffer by selecting File->Clear Data Pattern. Then input the ID code at data buffer location FE7F5D50 – FE7F5D5Fh with the correct endian setting in Device Config. 6. Refer to Users Manual for Configuration Setting Area options.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	4294967296
Manufacturer	Renesas
Packages	LFQFP(100)
Part Number	R5F5651EHDFP
Set programming	Yes
Vcc(program)	3.3
Package