Renesas R7F7010713AFP QFP(144) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: 3-Wire Serial I/O Mode. 1024kB Code Flash. Device Address range 00000000h-000FFFFFh is mapped to Data Pattern addresses 00000h-FFFFFh. 32kB Code Flash. Device Address range 01000000h-01007FFFh is mapped to Data Pattern addresses 100000h-107FFFh. 32kB Data Flash. Device Address range FF200000h-FF207FFFh is mapped to Data Pattern addresses 200000h-207FFFh. Erase function erases entire Code and Data Flash and erasing a Blank secured device is not supported. Serialization is not supported. Security for this device cannot be verified. The Option & Security Byte can be set under Device > Configure and are programmed with Secure command. In order to program these Bytes please enable Secure. For the Security Byte: Set Bit 5 to 0 will disable Erase Set Bit 6 to 0 will disable Program Set Bit 7 to 0 will disable Read. Bits 4 to 0 are reserved and should be set to 1s. Bits 6 and 7 can be erased but once bit 5 is programmed to 0 the whole chip is secured. Verification for this device is performed using the internal CRC feature of the device. The Data Pattern CRC is compared and validated against the CRC value returned internally by the device. Device specifications provide details on how this CRC is calculated. ‘