Renesas R7F701402EAFB#KA0(Custom 02) QFP(144) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE2ASMR144QPW, FVE2ASMR144QPW |
Adapters for Manual Programmers
| 8th Gen |
| FVE2ASMR144QPW, FVE2ASMR144QPW |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 4MB Code Flash+ 32kB User Area + 64kB Data Flash |
| Algorithm Programming Method: | 3-Wire Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Code Flash | R/W/E | Yes | 0000000-003FFFFF | 0000000-03FFFFF |
| User Area | R/W/E | Yes | 01000000-01007FFF | 01000000-01007FFF |
| Data Flash | R/W/E | Yes | FF200000-FF20FFFF | FF200000-FF20FFFF |
| Default Algorithm Range | — | — | 00000000-FF20FFFF | 00000000-FF20FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description |
| Security Flag | Set Bit 5 to 0 will disable Erase. Set Bit 6 to 0 will disable Program. Set Bit 7 to 0 will disable Read.Bits 4 to 0 are reserved and should be set to 1s.The Security Byte cannot be erased and once bit 5 is programmed to 0the whole chip is secured and no further operations can be performed. |
| 1. | Verification for this device is performed using the internal CRC feature of the device. | |
| The Data Pattern CRC is compared and validated against the CRC value returned internally by the device. | ||
| Device specifications provide details on how this CRC is calculated. | ||
| 2. | The Security Flag can be set under Device->Configure and programmed with Secure command. | |
| 3. | Security Byte will only be programmed and verified in the Secure command. | |
| 4. | This algorithm supports Firmware version RH850 V3 or later. | |
| 5. | Once Validate ICU-S is set to True stand alone verify and compare will not be supported in the Data Flash range. | |
| 6. | Serialization is not supported. | |
RPI Considerations:This device supports RPI format with features of ISEID code Option bytes.Once the device is programmed with ID codeit will show 0000 0000h as device ID when programmedwith other ID code file.To Enable ID Code Enable Secure feature.The verify fails after ISE protection is enabled ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 4280352768 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(144) |
| Part Number | R7F701402EAFB#KA0 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |