Renesas R7F701405EAFB#KA0 QFP(176) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE2ASMR176QFPA, FVE2ASMR176QFPA |
Adapters for Manual Programmers
| 8th Gen |
| FVE2ASMR176QFPA, FVE2ASMR176QFPA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | RH850G3M CPU core Microcontroller |
| Device Size: | 5MB Code Flash + 32kB User Area + 64kB Data Flash |
| Algorithm Programming Method: | 3-Wire Serial I/O Mode. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address (hex)(if this area is selected/Activated) | BPWin Buffer Byte Address (hex) |
| Code Flash | R/W/E | Yes | 0000_0000 – 004F_FFFF | 0000_0000 – 004F_FFFF |
| User Area Flash | R/W/E | Yes | 0100_0000 – 0100_7FFF | 0100_0000 – 0100_7FFF |
| Data Flash | R/W/E | Yes | FF20_0000 – FF20_FFFF | FF20_0000 – FF20_FFFF |
| Default Algorithm Range | — | — | 0000_0000 – FF20_FFFF | 0000_0000 – FF20_FFFF |
*R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description |
| Security Flag | Set Bit 5 to 0 will disable Erase. Set Bit 6 to 0 will disable Program. Set Bit 7 to 0 will disable Read.Bits 4 to 0 are reserved and should be set to 1s.The Security Byte cannot be erased and once bit 5 is programmed to 0the whole chip is secured and no further operations can be performed. |
| 1. | Verification for this device is performed using the internal CRC feature of the device. | |
| The Data Pattern CRC is compared and validated against the CRC value returned internally by the device. | ||
| Device specifications provide details on how this CRC is calculated. | ||
| 2. | The Security Flag can be set under Device->Configure and programmed with Secure command. | |
| 3. | Security Byte will only be programmed and verified in the Secure command. | |
| 4. | This algorithm supports Firmware version RH850 V3 or later. | |
| 5. | Once Validate ICU-S is set to True stand alone verify and compare will not be supported in the Data Flash range. | |
| 6. | Serialization is not supported. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 4280352768 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(176) |
| Part Number | R7F701405EAFB#KA0 |
| Vcc(program) | 3.3 |
| Package |