Renesas R7F7016473AFP-C QFP(144) Device

Adapters for Automated Programmers

8th Gen	9th Gen
FVE2ASMR144QFA, FVE2ASMR144QFA	FVE2ASMR144QFA

Adapters for Manual Programmers

8th Gen	9th Gen
FVE2ASMR144QFA, FVE2ASMR144QFA	FVE2ASMR144QFA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	32-bit G3KH CPU core
Device Size:	1024kBytes Code Flash + 32KBytes Code Flash (Extended User Area) + 64KBytes Data Flash
Algorithm Programming Method:	3-Wire Serial I/O Mode

Memory Organization:

*Memory Type*	**Attributes^()***	*Included in default Range (Y/N)*	*DUT Physical Byte Address(hex)(if this area is selected/Activated)*	*BPWin Buffer Byte Address(hex)*
Code Flash Memory	R/W/E	Yes	0000 0000 – 0002F FFFF	0000 0000 – 0002F FFFF
Code Flash (Extended User Area) Memory	R/W/E	Yes	0100 0000 – 0100 7FFF	0100 0000 – 0100 7FFF
Data Flash Memory	R/W/E	Yes	FF20 0000 – FF21 FFFF	FF20 0000 – FF21 FFFF
Default Algorithm Range	—	—	0000 0000 – FF21 FFFF	0000 0000 – FF21 FFFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Erase function for a Blank secured device is not supported. Security for this device cannot be verified. The Security Byte can be set under Device > Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 5 to 0 will disable Erase Set Bit 6 to 0 will disable Program Set Bit 7 to 0 will disable Read. Bits 4 to 0 are reserved and should be set to 1s.

1. OPBT0-OPBT7 options can be programmed compared read and verified. OPBT8-OPBT12 options can be programmed but cannot be compared read and verifiedErased. Device specifications provide details on how this CRC is calculated. 2. it is NOT possible to read out the ICU-M configuration once the ICU-M is active. 3. Erase function for a Blank secured device is not supported. 4. The Security Flag and ID code can be set in the Secure command. 5. Security for this device is verified after performing Secure operation. 6. In order to program this Byte please enable Secure. 7. Set bit 5 to 0 to disable Erase set bit 6 to 0 to disable Program set bit 7 to 0 to disable Read.

8. Bits 4 to 0 are reserved and should be set to 1s. Bits 5 6 and 7 cannot be erased and once bit 5 is programmed to 0 the whole chip is secured. 9. Serialization is not supported. 10. Once the SPD is enabled and programmed.The programmer cannot access the device again. 11. Enable Validate ICU to program OPBT8-12
‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes
4280418304

Manufacturer
Renesas

Packages
QFP(144)

Part Number
R7F7016473AFP-C

Vcc(program)
3.3

Package

8-bit Bytes	4280418304
Manufacturer	Renesas
Packages	QFP(144)
Part Number	R7F7016473AFP-C
Vcc(program)	3.3
Package