Renesas R7FS5D57A3A01CFP QFP(100) Device
Adapters for Automated Programmers
| 9th Gen |
| LX4ASMR100LQPTZA |
Adapters for Manual Programmers
| 9th Gen |
| LX4ASMR100LQPTZA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Renesas Synergy Platform |
| Device Size: | 512 KB Code Flash + 32kB Data Flash |
| Algorithm Programming Method: | Device Boot Firmware w/ Two-wire UART |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Code Flash | R/W/E | Yes | 0000_0000 – 0007_FFFF | 0000_0000 – 0007_FFFF |
| Data Flash | R/W/E | No | 4010_0000 – 4010_7FFF | 4010_0000 – 4010_7FFF |
| Default Algorithm Range | — | — | 0000_0000 – 0007_FFFF | 0000_0000 – 0007_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Option Function Select Register is located in Code Flash address 0400h – 043Bh. | |
| Programming the Option Function Select Register may disable access via this algorithm . | ||
| 2. | Data Flash memory range requires a full image with no blank areas. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 1074823168 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(100) |
| Part Number | R7FS5D57A3A01CFP |
| Set programming | Yes |
| Vcc(program) | 3.3 |