Renesas UPD70F3532F1A9-KN7-Q-A (FVE2ASMR352BGC) BGA(352) Device

Adapters for Automated Programmers

8th Gen	9th Gen
FVE2ASMR352BGC, FVE2ASMR352BGC	FVE2ASMR352BGC

Adapters for Manual Programmers

8th Gen	9th Gen
FVE2ASMR352BGC, FVE2ASMR352BGC	FVE2ASMR352BGC

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	V850E2M-M CPU core
Device Size:	3MByte Code Flash + 32kByte Data Flash
Algorithm Programming Method:	3-Wire Serial I/O Mode.

Memory Organization:

*Memory Type*	**Attributes^()***	*Included in default Range (Y/N)*	*DUT Physical Byte Address(hex)(if this area is selected/Activated)*	*BPWin Buffer Byte Address(hex)*
Code Flash	R/W/E	Yes	0000_0000 – 002F_FFFF	0000_0000 – 002F_FFFF
Data Flash	R/W/E	Yes	0200_0000 – 0200_7FFF	0200_0000 – 0200_FFFF (w/ID Tags)

Default Algorithm Range	—	—	0000_0000 – 0200_7FFF	0000_0000 – 0200_FFFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

For AutoRange purposes each block contains 4096 bytes. Data Pattern containing Data Flash must include valid ID Tags. Erase function for a Blank secured device is not supported. Selecting Erase will execute a chip erase on the entire device. Set OCD ID is curretly not supported. The Option Byte 0 can be set under Device->Configure and programmed with Secure command. This algorithm supports silicon version ES3.2 and below.

Security Byte*:

*Bit*	*Attributes and Details*
Bit 1	Set Bit 1 to 0 will disable Boot cluster rewrite. Once Bit 1 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed.
Bit 2	Set Bit 2 to 0 will disable Block Erase.
Bit 3	Set Bit 3 to 0 will disable Chip Erase. Once bit 3 is programmed to 0 the whole chip is secured and no further operations can be performed.
Bit 4	Set Bit 4 to 0 will disable Program. Bit 4 can be erased through Chip Erase
Bit 5	Set Bit 5 to 0 will disable Read. Bit 5 can be erased through Chip Erase
Bits 0 6 & 7	Bits 0 6 & 7 are reserved and should be set to 1s.

*The Security Byte can be set under Device->Configure and programmed with Secure command. Security for this device cannot be verified. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	33619968
Manufacturer	Renesas
Packages	BGA(352)
Part Number	UPD70F3532F1A9-KN7-Q-A
Vcc(program)	3.3
Package