Renesas uPD70F3745GJ-GAE-AX QFP(144) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVEG3ASMR144TQRD, FVE2ASMR144TQRC, FVE2ASMR144TQRC, FVEG3ASMR144TQRD | FVE2ASMR144TQRC, FVEG3ASMR144TQRD |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVEG3ASMR144TQRD, FVE2ASMR144TQRC, FVE2ASMR144TQRC, FVEG3ASMR144TQRD | FVE2ASMR144TQRC, FVEG3ASMR144TQRD |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | V850ES CPU Core |
| Device Size: | 768kByte Code Flash |
| Algorithm Programming Method: | 3-Wire Serial I/O Mode |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Code Flash | R/W/E | Yes | 0000_0000 – 000B_FFFF | 0000_0000 – 000B_FFFF |
| Default Algorithm Range | — | — | 0000_0000 – 000B_FFFF | 0000_0000 – 000B_FFFF |
* R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations: Erase function for a Blank secured device is not supported if chip erase is disabled. Security Bytes should be erased before reprogramming. Selecting Erase will execute a chip erase on the entire device. Secure must be enabled to program security byte. Serialization is not supported. Security Byte*:
| Bit |
Attributes and Details
|
| Bit 0 | Set Bit 0 to 0 will disable Chip Erase. Once bit 0 is programmed to 0 the whole chip is secured and no further operations can be performed. |
| Bit 1 | Set Bit 1 to 0 will disable Block Erase. |
| Bit 2 | Set Bit 2 to 0 will disable Program. |
| Bit 3 | Set Bit 3 to 0 will disable Read. Bit 3 can be erased through Chip Erase. Read disable disables verification of the option bytes. |
| Bit 4 | Set Bit 4 to 0 will disable Boot block rewrite. Once Bit 4 is programmed to 1 the boot block clusters specified are secured and no further operations can be performed. |
| Bits 5 6 & 7 | Bits 5 6 & 7 are reserved and should be set to 1. |
*The Security Byte can be set under Device->Configure and programmed with Secure command. Security for this device cannot be verified. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 786432 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(144) |
| Part Number | uPD70F3745GJ-GAE-AX |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |