Renesas uPD78F0513AMC-GAA-AX SSOP(38) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR38SS |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR38SS |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 78K/0 CPU core |
| Device Size: | 32kByte Data Flash |
| Algorithm Programming Method: | 3-Wire Serial I/O Mode. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 0000 – 7FFF | 0000 – 7FFF |
| Default Algorithm Range | — | — | 0000 – 7FFF | 0000 – 7FFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations: 1. This device does NOT support Read and Compare functions. 2. Selecting Erase will execute a chip erase on the entire device. 3. Erase function for a Blank secured device is not supported. 4. Security for this device cannot be verified. 5. The Security Flag can be set under Device->Configure and programmed with Secure operation. 6. Bits 1 2 and 3 can be erased through Chip Erase but once bit 0 is programmed to 0 the whole chip is secured and no further operations can be performed. 7. Once Bit 4 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed. Security Flag:
| Bit |
Attributes and Details
|
| 0 | Setting Bit 0 to 0 will disable Chip Erase. |
| 1 | Setting Bit 1 to 0 will disable Block Erase. |
| 2 | Setting Bit 2 to 0 will disable Program. |
| 3 | Bit 3 should always be set to 1 since this device does not support Read operation. |
| 4 | Setting Bit 4 to 0 will disable Boot block rewrite. |
| 5 6 7 | Bits 5 to 7 are reserved and should be set to 1s. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 32768 |
|---|---|
| Manufacturer | Renesas |
| Packages | SSOP(38) |
| Part Number | uPD78F0513AMC-GAA-AX |
| Vcc(program) | 4.5 |
| Package |