Renesas uPD78F1834AGBA2-GAH-E3-Q-G QFP(64) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR64QFPR, FVE4ASMR64QFPR | FVE4ASMR64QFPR |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR64QFPR, FVE4ASMR64QFPR | FVE4ASMR64QFPR |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 78K0R/FE3 8-Bit Single-Chip Microcontrollers |
| Device Size: | 192KB Flash Memory |
| Algorithm Programming Method: | Single-wire UART |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address (hex)(if this area is selected/Activated) | BPWin Buffer Byte Address (hex) |
| Flash ROM | R/W/E | Yes | 0000_0000 – 0002_FFFF | 0000_0000 – 0002_FFFF |
| Default Algorithm Range | — | — | 0000_0000 – 0002_FFFF | 0000_0000 – 0002_FFFF |
*R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Special Device Considerations:
| Security Data Frame | Description | ||||
| Security Flag | Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Bit 3 should always be set to 1 since this device doesn’t support Read operation. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bits 1 & 2 can be erased through Chip Erase but once bit 0 or 4 are programmed to 0 the whole chip is secured and no operation can be done on it.
| Boot Cluster |
Boot cluster last block number (fixed to 07H)Fixed value determined by 78K0R/Fx3 Firmware information app note (ZUD-BG-09-0167) | Flash Shield Window |
Flash shield window starting and ending block numbers Broken into 4 bytes: FSWS(H) FSWS(L) FSWE(H) FSWE(L) |
|
| 1. | The Security Data Frame can be set via two methods (Secure must be enabled): | |
| A: Security Data Frame can manually be set under Device > Configure and programmed with Secure command. | ||
| B: Loading an RPI data file will pass Security Data Frame to the algorithm and is programmed with Secure command. | ||
| 2. | Loading an RPI formatted file will overwrite and bypass any changes/settings in the configuration options. | |
| 3. | The data flash area cannot be written by using a dedicated flash memory programmer.. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 196608 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(64) |
| Part Number | uPD78F1834AGBA2-GAH-E3-Q-G |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |