Signetics(Philips) P87C576FFA DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM.Default buffer value must be set to 255(FFh). The EncryptBuf is used on read back. If theEncryption array has been programmed EncryptBuf must contain the correct encryption key toread the device properly. You must select the appropriate security mode under DEVICE/OPTIONSto operate the secure command. Two lock bits are available in this chip: LB1 and LB2. If LB1is set further programming of EPROM is disabled. If LB2 is set verify of EPROM is disabled.The encryption array itself cannot be read out.!!!Note: If both Encryption and Secure functions are required they must be done together byenabling both the Encrypt after programming’ and ‘Secure after programming’ options underDEVICE/OTPIONS. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 8192 |
|---|---|
| Manufacturer | Signetics(Philips) |
| Packages | DIP(40) |
| Part Number | P87C576FFA |
| Vcc(program) | 5 |
| Package |