Silicon Laboratories C8051F305-GS SOIC(14) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM14SA, FASM16SAT, FASM16SA | FASM14SA, FASM16SAT, FASM16SA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA | FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA | FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash Program Memory. The Write/Read Lock Byte at FLASH address 7FFhcan be set through Device Configure and programmed with Secure command.In order to program Write/Read Lock Byte please enable Secure.The Lock Byte is stored in FLASH address 7FFh and it is decoded in the following way:Bits 7-4 are for Write Lock: Clearing any of these bits to logic 0 prevents all FLASH memoryfrom being written or block-erased.Bits 3-0 are for Read/Write Lock: Clearing any of these bits to logic 0 prevents all FLASH memoryfrom being read written or block-erased.The only way to remove the protection is executing a Chip Erase operation.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 2048 |
|---|---|
| Manufacturer | Silicon Laboratories |
| Packages | SOIC(14) |
| Part Number | C8051F305-GS |
| Set programming | Yes |
| Vcc(program) | 3 |
| Package |