Silicon Laboratories C8051F382-GQ QFP(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FASM48TQFE, FASM48TQN, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FASM48TQFE, FASM48TQN, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FVE4ASMR48QFPZ, FVE4ASMR48QFPZ | FVE4ASMR48QFPZ |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FSM48TQFE, FSM48TQN, FASM48TQFE, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD, LASM48TQFE (repl.) | FSM48TQFE, FSM48TQN, FASM48TQFE, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD, LASM48TQFE (repl.) | FVE4ASMR48QFPZ, FVE4ASMR48QFPZ | FVE4ASMR48QFPZ |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48TQFE, FSM48TQN, FASM48TQFE, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD, LASM48TQFE (repl.) | FSM48TQFE, FSM48TQN, FASM48TQFE, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD, LASM48TQFE (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 10-bit MCU |
| Device Size: | 32 KByte Flash Memory |
| Algorithm Programming Method: | C2 Interface |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0000_0000 – 0000_7FFFh | 0000_0000 – 0000_7FFFh |
| Default Algorithm Range | — | — | 0000_0000 – 0000_7FFFh | 0000_0000 – 0000_7FFFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | The Write/Read Lock Byte at FLASH address 7FFFh can be set through Device Configure menu and programmed with Secure command.
| 2. |
The Lock Byte number is stored in FLASH address 7FFFh.
| 3. |
The FLASH pages are locked starting with page 0 which contains FLASH addresses [0000h to 01FFh] and are locked consecutively.
| 4. |
It is not possible to lock the second page of FLASH without also locking the first page of FLASH.
| 5. |
If any FLASH pages are lockedthen the page [7E00h to 7FFEh] containing the Lock Byte is also locked.
| 6. |
The Lock Byte has a default value 0xFFh. Any value can be placed in the buffer but will not be programmed unless Secure is enabled.Example: To lock the first 3 pages of FLASH addresses [0000h to 05FFh]the one complement of ‘00000011b’ is ‘11111100b’ or FCh. thus write FCh to the Lock Byte address. This would alsoautomatically protect the page [7E00h to 7FFEh] containing the Lock Byte. The only way to remove the protection is executing a Chip Erase operation. |
| ||||||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 32768 |
|---|---|
| Manufacturer | Silicon Laboratories |
| Packages | QFP(48) |
| Part Number | C8051F382-GQ |
| Set programming | Yes |
| Vcc(program) | 3 |
| Package |