Silicon Laboratories Si4010-C2-AT MSOP(10) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMH10MSOPA (obs.), LASMH10MSOPA (obs.) (repl.) | FASMH10MSOPA (obs.), LASMH10MSOPA (obs.) (repl.) | LASMH10MSOPA (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMH10MSOPA (obs.), FASMH10MSOPA (obs.), LASMH10MSOPA (obs.) (repl.) | FSMH10MSOPA (obs.), FASMH10MSOPA (obs.), LASMH10MSOPA (obs.) (repl.) | LASMH10MSOPA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMH10MSOPA (obs.), FASMH10MSOPA (obs.), LASMH10MSOPA (obs.) (repl.) | FSMH10MSOPA (obs.), FASMH10MSOPA (obs.), LASMH10MSOPA (obs.) (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The Si4010 burn file valid for this device (.nbf) has metadata that must be removed to form an Intel-Hex file that can be loaded in the BPWin software. The first valid line of this extracted file normally starts with :’ Only this extracted Intel-Hex file should be loaded to the Data Pattern. A maximum of 4 such files can be loaded: Address range 0000h-107Fh is mapped to first Hex file. Address range 1080h-20FFh is mapped to second Hex file. Address range 2100h-317Fh is mapped to third Hex file. Address range 3180h-41FFh is mapped to fourth Hex file. Each hex file will be downloaded to RAM location 0000h and executed to program NVM area ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16896 |
|---|---|
| Manufacturer | Silicon Laboratories |
| Packages | MSOP(10) |
| Part Number | Si4010-C2-AT |
| Set programming | Yes |
| Vcc(program) | 3 |
| Package |