Smart Modular Technologies SH8M08GBATDFA BGA(153) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This algorithm can program data into Boot Area Partitions. Boot Area Partition 1 is mapped to Data Pattern: 000000000h-000FFFFFFh and Boot Area Partition 2 is mapped to Data Pattern: 001000000h-001FFFFFFh. General Purpose Partitions 1-4 if any are mapped directly after above mentioned boot partitions. This is followed by User Data Area. Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. The size of each partition is defined to be multiple of ‘High Capacity Write Protect Group Size’. ‘High Capacity Write Protect Group Size’ of this device is 8MByte. The maximum amount of memory area which can have the enhanced attribute is 3688MByte. Default device range is set to (002000000h – 1CEFFFFFFh). It is recommended to adjust the ‘High Device Address’ under Device->settings to match the size of the data file (taking into account boot partitions’ offsets). 8GB MMC Card. The device contains 15106048 sectors. The Sector Count in the Extended CSD Register of the device might be less than the supported number of sectors. Ranges selectable under Device->Range must be aligned to 16384 device sectors. Each physical sector on the device has 512 bytes. Erased memory content for the device is 00h. Simple serialization is not supported for this device and should not be used. If certain partitions are included in erase operation all the selected partition(s) will be erased. ‘