Smart Modular Technologies SH9MCGP1ATI01_NOVA3(pSLC Custom2 Self-Test) BGA(153) Device

Adapters for Automated Programmers

8th Gen	9th Gen	Flashstream
FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153FBGEA, FVE4ASMC153BGJ, FVE4ASMC169FBGH (obs.), FVE4ASM153FBGE (obs.)	FVE4ASMC153FBGEA, FVE4ASMC153BGJ, FVE4ASMC169FBGH (obs.), FVE4ASM153FBGE (obs.)	FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153FBGEA, FVE4ASMC153BGJ, FVE4ASMC169FBGH (obs.), FVE4ASM153FBGE (obs.)

Adapters for Manual Programmers

8th Gen	9th Gen	Flashstream
FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153FBGEA, FVE4ASMC153BGJ, FVE4ASMC169FBGH (obs.), FVE4ASM153FBGE (obs.)	FVE4ASMC153FBGEA, FVE4ASMC153BGJ, FVE4ASMC169FBGH (obs.), FVE4ASM153FBGE (obs.)	FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153FBGEA, FVE4ASMC153BGJ, FVE4ASMC169FBGH (obs.), FVE4ASM153FBGE (obs.)

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: This is a Custom algorithm. In addition to supporting the device User Data Area this algorithm can be used to update the device FW. This option is disabled by default. To activate the update FW procedure please select Enabled’ to ‘Include FW update during Program and Verify’ under Device->Settings AND load the required files listed in the table below to the addresses shown. If enabled the FW update will be done in Program operation whereas Verify operation will verify the HWPage and WPPage. Selecting Read and Compare operations will only read/compare the data in the device’s User Data Area (if included). It is recommended to set device range to 0000_0000_0000h – 0000_003F_FFFFh if no customer data is required to be programmed into the device’s User Data Area. Default device range is set to 0000_0040_0000h – 0015_203F_FFFFh. This can be changed under Device->Settings.

Data Pattern Address (hex)	Required Data
0000_0000_0000h – 0000_0000_01FFh	Pre-format.bin
0000_0000_0200h – 0000_0000_03FFh	HWPage.bin
0000_0000_0400h – 0000_0000_05FFh	WPPage.bin
0000_0000_0600h – 0000_0001_FFFFh	Manufacturer code A.bin
0000_0002_0000h – 0000_0002_FFFFh	FW code B.bin
0000_0020_0000h – 0000_002F_FFFFh	SelfTest FW code C.bin
0000_0030_0000h – 0000_003F_FFFFh	SelfTest FW code S.bin
0000_0040_0000h – 000E_C03F_FFFFh	Customer data

64GB MMC Card. The device contains 123731968 sectors. The Sector Count in the Extended CSD Register of the device might be less than the supported number of sectors. Ranges selectable under Device->Range must be aligned to 131072 device sectors. Each physical sector on the device has 512 bytes. Erased memory content for the device is 00h. Simple serialization is not supported for this device and should not be used. Custom log file will only be updated during Program operation if ‘Include FW update during Program and Verify’ is ‘Enabled’ under Device->Settings ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	63354961920
Manufacturer	Smart Modular Technologies
Packages	BGA(153)
Part Number	SH9MCGP1ATI01_NOVA3
Set programming	Yes
Vcc(program)	2.8
Package