Spansion S25FL064P0XMFI00 SOIC(16) Device
Adapters for Automated Programmers
| 8th Gen | Flashstream |
| FVE4ASMR16SD, FVE4ASM16SD, FVE4ASMR16SD, FVE4ASM16SD | FVE4ASMR16SD, FVE4ASM16SD, FVE4ASMR16SD, FVE4ASM16SD |
Adapters for Manual Programmers
| 8th Gen | Flashstream |
| FVE4ASMR16SD, FVE4ASM16SD, FVE4ASMR16SD, FVE4ASM16SD | FVE4ASMR16SD, FVE4ASM16SD, FVE4ASMR16SD, FVE4ASM16SD |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | CMOS Serial Flash Memory |
| Device Size: | 64M-BIT |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 00000000-007FFFFF | 00000000-007FFFFF |
| OTP locations 114h-213h | R/W | Yes | 00800000-008000FF | 00800000-008000FF |
| OTP locations 216h-2FFh | R/W | Yes | 00800100-008001E9 | 00800100-008001E9 |
| Default Algorithm Range | — | — | 00000000-007FFFF | 00000000-007FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. The device has 128 equal sectors with 64K byte each. This device contains thirty 16-byte and one 10-byte OTP regions that can be individually locked. The OTP regions are located at address range [800000h-8001E9h] in the Data Pattern. Device OTP regions memory address range 114h-213h is mapped at [800000h-8000FFh] in the Data Pattern. Device OTP regions memory address range 216h-2FFh is mapped at [800100h-8001E9h] in the Data Pattern. OTP regions can be permanently locked by setting OTP Memory Region Lock Byte under Device Config > Configure. Once BPNV bit under Device Config > Configure is set BP0 BP1 and BP2 will become volatile and are not read anymore. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 8389098 |
|---|---|
| Manufacturer | Spansion |
| Packages | SOIC(16) |
| Part Number | S25FL064P0XMFI00 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |