Spansion S25FL128SDPMFB003 SOIC(16) Device

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. 128M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device Config > Configure . The default Device Range is set to [0000000h-0FFFFFFh]. Please modify the range under Device Config > Range if any of the Security Registers need to be included. The correct password value located in the range [1000400h-1000407h] may be read only after it is programmed and before the Password Mode has been selected by programming the Password Protection Mode bit to 0 in the ASP Register (ASP[2]). The OTP region is located in the range [1000000h-10003FFh]. The Factory Programmed 128-bit random number located at the beginning of the OTP region cannot be programmed and data in this region will not be shown in the Buffer Editor. OTP Lock bits are located in the Buffer location [1000010h-1000013h] and Reserved bits are located at [1000014h-100001Fh]. Once the OTP lock bits are programmed the OTP region cannot be re-programmed. The device lock bits may be programmed under Device Config > Configure. Each Group is divided into 256K Bytes of data