+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Spansion S25FS512SAGBHI21 BGA(25) Device

Adapters for Automated Programmers

6th Gen 7th Gen
FASMC24BGV, FASMC24BGR (obs.) FX4ASMC24BGV, FASMC24BGV, FX4ASMC24BGR (obs.), FASMC24BGR (obs.), LX4ASMC24BGV (repl.)

Adapters for Manual Programmers

6th Gen 7th Gen
FASMC24BGV, FSMC24BGR (obs.), FASMC24BGR (obs.) FX4ASMC24BGV, FASMC24BGV, FX4SMC24BGR (obs.), FSMC24BGR (obs.), FX4ASMC24BGR (obs.), FASMC24BGR (obs.), LX4ASMC24BGR (obs.) (repl.), LX4ASMC24BGV (repl.)

Adapters for Engineering Programmers

6th Gen 7th Gen
FASMC24BGV, FSMC24BGR (obs.), FASMC24BGR (obs.) FX4ASMC24BGV, FASMC24BGV, FX4SMC24BGR (obs.), FSMC24BGR (obs.), FX4ASMC24BGR (obs.), FASMC24BGR (obs.), LX4ASMC24BGR (obs.) (repl.), LX4ASMC24BGV (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 512 Mbit
Algorithm Programming method: Standard SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 03FF_FFFF 0000_0000 – 03FF_FFFF
SecSi sector R/W N0 0400_0010 – 0400_0407 0400_0010 – 0400_0407
Default Algorithm Range 0000_0000 – 03FF_FFFF 0000_0000 – 03FF_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The SecSi sector can be purchased programmed and locked from the factory. If this is the case this sector needs to be excluded from programming and verification ranges as this data could have a unique number.
The configuration option for the factory lock is used to indicate the status of the chip.
If this option is different than the state of the chip during verification or compare it will cause an error.
If the part has not been locked by the factory the user can treat this sector as an additional memory sector with OTP sector protection.
Persistent Protection bit(PPB) feature is setup under Device Configure. PPB is one time programmable(OTP).

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

67109896

Manufacturer

Spansion

Packages

BGA(25)

Part Number

S25FS512SAGBHI21

Set programming

Yes

Vcc(program)

1.8

Package