SST SST89V58RD2-PI DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D600 | FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DF, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DF, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DF, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DF, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Embedded SuperFlash Memory.This part has two programmable blocks.They are mapped to Buffer locations [0000h-7FFFh] (Block0) and [E000h-FFFFh] (Block1). Theseblocks can be individually Erased and Programmed by adjusting the range settings.The address range located in Buffer locations [8000h-DFFFh] is ignored for all commands.Please note block erase cannot erase the corresponding block if Security Lock has been Enabled. Also blockerase does not Erase the SC0 SC1 Double Clock or Security Lock bits. If the full range is selectedthe Erase operation will perform the Chip Erase procedure. This procedure erases SC0 SC1 Double Clock and the SecurityLock bits. SB123 (Security Lock Bits) can be programmed by enabling Secure options.Start-up Configuration bits SC0 SC1 and the Double Clock Operation bit can be set under Device Configure.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | SST |
| Packages | DIP(40) |
| Part Number | SST89V58RD2-PI |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |