STMicroelectronics M36WWR6650D0ZAQ BGA(88) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: 2 x 64Mbit Flash Memory and 32Mbit PSRAM.Flash 1 is a bottom boot device and is mapped to addresses 000000h-3FFFFFh (buffer locations: 000000h-7FFFFFh).Flash 2 is a top boot device and is mapped to addresses 400000h-7FFFFFh (buffer locations: 800000h-FFFFFFh).Each Flash contains 128 bit User Programmable OTP cells and 64 bit unique device number which are pre-programmedby manufacturer and cannot be modified.The Protection Registers of both the flashes are treated as one and are mapped tobuffer locations 1000000h-100002Fh (Flash 1: 1000000h-1000017h Flash 2: 1000018h-100002Fh).Setting the Lockout Parameter Block 0′ option to LOCKED will permanently lock the Security Block.(buffer address: 0h-1FFFh for Flash 1 and buffer address: FFE000h-FFFFFFh for Flash 2).Setting the ‘Lockout User Register’ option to LOCKED will lock the User Programmable portion of the Protection Register.Enabling the ‘Lockout User Register’ option will also permanently freeze the ‘Lockout Parameter Block 0’ option.When erasing the User Register of the Protection Register the programmer will blank-check the areaand will fail the ‘Erase’ operation if the area is not blank. Performing ‘Erase’ on the User Register orParameter Block 0 will also fail if their respective Protection Register Lock Bits have been ENABLED. ‘