STMicroelectronics M58CR032D BGA(56) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This device contains 128 bit Protection Register. All 128 bits are located in the buffer ataddress locations 400000h-40000Fh. The first 64 bits are pre-programmed by themanufacturer and cannot be modified. Program’ ‘Compare’ and ‘Verify’ operations willignore these bits. The other 64 bits are user programmable. Setting the ‘Lockout Parameter Block 0’option under Device/Configure to ENABLE will Permanently Protect the Security Block(buffer address: 0h-1FFFh). Setting the ‘Lockout User Register’ option to ENABLE willLock the User Programmable portion of the Protection Register. Enabling the ‘Lockout User Register’option will also Permanently Freeze the ‘Lockout Parameter Block 0’ option. WhenErasing the User Register of the Protection Register the programmer will blank-check the areaand will fail the ‘Erase’ operation if the area is not blank. Performing ‘Erase’ on the User Register orParameter Block 0 will also fail if their respective Protection Register Lock Bits have been ENABLED.If ‘Auto Range Detection’ is set to YES the OTP bits in this range will not be programmed or verified. ‘