STMicroelectronics M93S66-W SOIC(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen | Flashstream |
| FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) | FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) | FVE4ASMR08SJAB, FVE4ASMR08SJAB | FVE4ASMR08SJAB | FVE4ASMR08SJAB, FVE4ASMR08SJAB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen | Flashstream |
| FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) | FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) | FVE4ASMR08SJAB, FVE4ASMR08SJAB | FVE4ASMR08SJAB | FVE4ASMR08SJAB, FVE4ASMR08SJAB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) | FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Electrically Erasable PROM (EEPROM). |
| Device Size: | 4 Kbit |
| Algorithm Programming Method: | Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Memory | [R/W/E] | [Yes] | [000-FF] | [000-1FF] |
| Default Algorithm Range | — | — | [000-FF] | [000-1FF] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? | Enter the starting address <0-255> to be protected: | Sets the address for write protected area.If ‘Write Protection’ is set to OFF then the ‘starting address to be protected’ should be set to 255. | FF | Yes |
| Write Protection | Option to set the write protection to OFF/ON/Permanent | OFF | Yes |
| 1. | Serialization Supported: | Yes |
| 2. | If you get error message ‘Data in chip does not match buffer.’ when you try to program a chip the write protection configuration for the chip may have been set permanently | |
| 3. | The Device/Secure command sets write protection for the entire chip PERMANENTLY. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | SOIC(8) |
| Part Number | M93S66-W |
| Vcc(program) | 5 |
| Package |