STMicroelectronics SPC560P44L3CEFA QFP(100) Device

Adapters for Automated Programmers

8th Gen

FVE4ASMR100LQFPB, FVE4ASMR100LQFPB

Adapters for Manual Programmers

8th Gen

FVE4ASMR100LQFPB, FVE4ASMR100LQFPB

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	32-bit Power Architecture® MCU
Device Size:	384K-byte

Memory Organization:

*Memory Type*	**Attributes^()***	*Included in default Range (Y/N)*	*DUT Physical Byte Address(hex)(if this area is selected/Activated)*	*BPWin Buffer Byte Address(hex)*
Code Flash Array	R/W/E	Yes	00000h – 2FFFFh	00000h – 5FFFFh
Code Flash Shadow Sector	Please See Device Notes Below	Yes	100000h – 101FFFh	200000h – 203FFFh
Code Flash Test Address Space	W	No	200000h – 201FFFh	400000h – 403FFFh
Data Flash Array	R/W/E	No	400000 – 407FFFh	800000h – 80FFFFh
Data Flash Test Address Space	W	No	600000h – 601FFFh	C00000h – C03FFFh

Default Algorithm Range	—	—	00000 – 2FFFFh	00000 – 5FFFFh

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.

Special Device Considerations:

The Code Flash Shadow array contains configuration information for the device. Locations 203DE0-203DE7h in the Data Pattern correspondto the censorship word for the device. These locations are factory programmed with 55AAh that unsecure the flash.Programming a different value will secure the device and cannot be unsecured disabling further Programmer access to the device.All reserved area in Shadow array are programmed back with factory programmed value.All reserved area in Test Address Space are skipped for all operations.The Program operation will first Erase and then Program the selected array.This algorithm supports only Big Endian byte order. After a successful Program + Verify operation subsequent stand alone operations may fail if the Data Pattern codeexecutes to modify the Code or Data Flash.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	STMicroelectronics
Packages	QFP(100)
Part Number	SPC560P44L3CEFA
Set programming	Yes
Vcc(program)	3.3
Package