STMicroelectronics ST7FLITE29F2M6 SOIC(20) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR20SEB, FASM20SE | FASMR20SEB, FASM20SE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR20SEB, FSM20SE, FASMR20SEB, FASM20SE, LX4ASMR20SEB (repl.) | FSMR20SEB, FSM20SE, FASMR20SEB, FASM20SE, LX4ASMR20SEB (repl.) | LX4ASMR20SEB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR20SEB, FSM20SE, FASMR20SEB, FASM20SE, LX4ASMR20SEB (repl.) | FSMR20SEB, FSM20SE, FASMR20SEB, FASM20SE, LX4ASMR20SEB (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EEPROM & Flash. The EEPROM memory is mapped in the Buffer from 1000h to 10FFh. The Flash memory is mapped from E000h to FFFFh. The device has RC oscillator calibration bytes stored in the EEPROM at locations 1000h and 1001h and in the Flash at locations FFDEh and FFDFh. These locations are not programmed or verified preserving the values unless the user select to program them in the Config Options. They will be read into the Buffer. Read secure is reset by reprogramming the part and this will restore the original calibration bytes for the RC oscillator and cannot be restored by this algorithm. Flash Write protect is permanent and cannot be reset once programmed.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | SOIC(20) |
| Part Number | ST7FLITE29F2M6 |
| Vcc(program) | 5 |
| Package |