STMicroelectronics STM32F030CCT7 LQFP(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR48LQFPMA | FX4ASMR48LQFPMA, FASMR48LQFPMA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSMR48LQFPMA, FASMR48LQFPMA | FX4SMR48LQFPMA, FSMR48LQFPMA, FX4ASMR48LQFPMA, FASMR48LQFPMA, LX4ASMR48LQFPMA (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR48LQFPMA, FASMR48LQFPMA | FX4SMR48LQFPMA, FSMR48LQFPMA, FX4ASMR48LQFPMA, FASMR48LQFPMA, LX4ASMR48LQFPMA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU |
| Device Size: | 256 KByte Flash Memory |
| Algorithm Programming Method: | USART protocol used in the STM32 bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0803_0000 – 0803_FFFF | 0803_0000 – 0803_FFFF |
| Option Bytes | R/W/E | Yes | 1FFF_F800 – 1FFF_F80B | 1FFF_F800 – 1FFF_F80B |
| Default Algorithm Range | — | — | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? |
| RDP protection | Option byte 0: at buffer address 1FFF_F800h is used for setting read protection If RDP protection is set to level 1(Non AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any further operation on device will fail. | Level 0 | Yes |
| 1. | Selecting Erase operation will do global erase including the IAP area and option bytes. | |
| 2. | If BOOT1 option bit is set to ‘0’ device will not be accessible by this algorithm. | |
| 3. | Stand alone operation might fail if device was programmed with executable code. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 536868876 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | LQFP(48) |
| Part Number | STM32F030CCT7 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |