STMicroelectronics STM32F205VCT7 LQFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR100LQFYA | FX4ASMR100LQFYA, FASMR100LQFYA, LX4ASMR100LQFYA (repl.) | LX4ASMR100LQFYA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR100LQFYA, FASMR100LQFYA | FX4SMR100LQFYA, FSMR100LQFYA, FX4ASMR100LQFYA, FASMR100LQFYA, LX4ASMR100LQFYA (repl.) | LX4ASMR100LQFYA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR100LQFYA, FASMR100LQFYA | FX4SMR100LQFYA, FSMR100LQFYA, FX4ASMR100LQFYA, FASMR100LQFYA, LX4ASMR100LQFYA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: ARM-based 32-bit MCU with Flash. 256KByte Flash Memory (Device address 4000000h-401FFFFh) is mapped to Data Pattern: 8000000h-803FFFFh. OTP memory(Device address FFFBC00h-FFFBD07h) is mapped to Data Pattern: 1FFF7800h-1FFF7A0Fh. 16 Option Bytes (Device address FFF6000h-FFF6007h) are mapped to Data Pattern: 1FFFC000h-1FFFC00Fh. Please set Option Bytes under Device > Configure. If RDP protection is set to level 1(None AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails. Stand alone operation might fail if device was programmed with executable code.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | LQFP(100) |
| Part Number | STM32F205VCT7 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |