STMicroelectronics STM32F302CCT6 QFP(48) Device

Adapters for Automated Programmers

6th Gen	7th Gen	9th Gen
FASMR48LQFK	FX4ASMR48LQFK, FASMR48LQFK, LX4ASMR48LQFK (repl.)	LX4ASMR48LQFK

Adapters for Manual Programmers

6th Gen	7th Gen	9th Gen
FSMR48LQFK, FASMR48LQFK	FX4SMR48LQFK, FSMR48LQFK, FX4ASMR48LQFK, FASMR48LQFK, LX4ASMR48LQFK (repl.)	LX4ASMR48LQFK

Adapters for Engineering Programmers

6th Gen	7th Gen
FSMR48LQFK, FASMR48LQFK	FX4SMR48LQFK, FSMR48LQFK, FX4ASMR48LQFK, FASMR48LQFK, LX4ASMR48LQFK (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: ARM-based 32-bit MCU with Flash 256KByte Flash Memory is mapped to Data Pattern: 8000000h-803FFFFh 16 Option Bytes are mapped to Data Pattern: 1FFFF800h-1FFFF80Fh

Data Pattern Address	Bits [15:8]	Bits[7:0]
1FFFF800h	nRDP	RDP
1FFFF802h	nUSER	USER
1FFFF804h	nData0	Data0
1FFFF806h	nData1	Data1
1FFFF808h	nWRP0	WRP0
1FFFF80Ah	nWRP1	WRP1
1FFFF80Ch	nWRP2	WRP2
1FFFF80Eh	nWRP3	WRP3

If RDP protection is set to level 1(None AAh Non CCh) the main Flash memory and the backup registers (RTC_BKPxR in the RTC) are totally inaccessible. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails. If BOOT1 option bit is set to ‘0’ device will not be accessible by this algorithm. A level 1 read protected or write protected device must be erased before it is programmed. Option bytes contain read and write protection bits and are always erased before program if selected. The entire device range must be selected to erase read protection on the device. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	536868880
Manufacturer	STMicroelectronics
Packages	QFP(48)
Part Number	STM32F302CCT6
Set programming	Yes
Vcc(program)	3.3
Package