Adapters for Automated Programmers
8th Gen | 9th Gen |
FVE2ASMR144QFST, FVE2ASMR144QFST | FVE2ASMR144QFST |
Adapters for Manual Programmers
8th Gen | 9th Gen |
FVE2ASMR144QFST, FVE2ASMR144QFST | FVE2ASMR144QFST |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
Device Type: | ARM-based 32-bit MCU with 2048 KByte Flash. |
Device Size: | 2048K-Byte Flash + 1K-Byte OTP Area + 16 Bytes Lock Block |
Algorithm Programming Method: | SWD protocol. |
Memory Organization:
Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
Main Flash Memory | R/W/E | Yes | 0800_0000 – 081F_FFFF | 0800_0000 – 081F_FFFF |
OTP Block 0-15 | R/W | No | 1FF0_F000 – 1FF0_F3FF | 1FF0_F000 – 1FF0_F3FF |
OTP Lock Block | R/W | No | 1FF0_F400 – 1FF0_F40F | 1FF0_F400 – 1FF0_F40F |
Default Algorithm Range | — | — | 0800_0000 – 081F_FFFF | 0800_0000 – 081F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
1. | If RDP protection is set to level 1(None AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails.
2. |
32 Option Bytes are mapped to the buffer at [0x1FFF_0000-0x1FFF_0018] Please set Option Bytes under Device > Config.
| 3. |
Stand alone operation might fail if device was programmed with executable code. |
|
Option Byte Organization:
Option Byte Address | [63:16] | [15:0] | ST programmed value | 0x1FFF 0000 | Reserved | ROP & user option bytes (RDP & USER) | 0xAAFF | 0x1FFF 0008 | Reserved | IWDG_STOP IWDG_STBY and nDBANK nDBOOT and Write protection nWRP/NWRPDB (sector 0 to 11) and user option bytes | 0xFFFF | 0x1FFF 0010 | Reserved | BOOT_ADD0 | 0x0080 | 0x1FFF 0018 | Reserved | BOOT_ADD1 | 0x0040 |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
8-bit Bytes | 535884816 |
---|---|
Manufacturer | STMicroelectronics |
Packages | QFP(144) |
Part Number | STM32F777ZIT6TR |
Set programming | Yes |
Vcc(program) | 3.3 |
Package |